Resistence thermometers RTD

Back to Search

RPI

Portable resistance thermometer for generical and laboratories measurements, available for surface, immersion and penetration measurements. The probe have a glass filled plastic handle and the extension cable is spiralized. Are also availables a lot of connectors to be able to be connectable with several portable thermometers.

Download PDF

RLM

Cylindrical resistance thermometer with AISI 304 sheath suitable for generical measurements and regulations. The output of the cable from the tube is protected with a stainless steeel spring. It is possible to have one or two sensing elements fitted inside the protective tube with 2,3 or 4-wires (only with one sensing element) connection.

Download PDF

RLR

Cylindrical resistance thermometer with AISI 304 sheath suitable for generical measurements and regulations. The probe fixing is realized by means of a threaded nipple welded on the sheath. It is possible to have one or two sensing element fitted inside the protective tube with 2,3 or 4-wires (only with one sensing element) connection.

Download PDF

ROT

Resistance thermometer with stainless steel sheath suitable for generical measurements and regulations. The probe fixing is realized by means of a brass ring soldered on the tip of the tube; it could be fixed on a surface with a normal screw. The output cable is protected with a stainless steel spring.

Download PDF

RMM

Cylindrical resistance thermometer with AISI 316 sheath insulated with compact magnesium oxide (MgO). Due to the particular construction type, this probe is particulary indicated where are presents high vibrations and where a fast respons time is necessary. The transition sleeve (where is realized the junction between the sensing element and the cable) is made in stainless steel like the protection spring situated at the cable output.

Download PDF

RBA

Spring-loaded resistance thermometer indicated for measurements into metallic plates; the fixing is by threaded connection with bayonet fitting. The immersion depth is adjustable up to 190mm (on request is also available the model up to 300mm); the stem and the load spring are made in stainless steel.

Download PDF

RBS

Spring-loaded resistance thermometer indicated for measurement into metallic plates; the fixing is by threaded connection with bajoent fitting; due to the bended cable output this probe is particulary indicated where are present problems of space. The immersion depth is adjustable; the stem and the load spring are made in stainless steel.

Download PDF

RLF

Resistance thermometer for the heart temperature measurement suitable for the use inside the food ovens. The probe has an handle for the piercing into the product; the part of cable in contact with the food is covered with a stainless steel flexible sheath and a special fitting allow the cable entrance into the oven.

Download PDF

RMF

Resistance thermometer for the heart temperature measurement suitable for the use inside the food ovens. The probe has a teflon handle for the piercing into the product.

Download PDF

RLB

Resistance thermometer suitable for the measurement of the pipe temperatures. The special design of the aluminium body allow an high thermal exchange with the internal sensing elemen with a consirable reduction in measuring error. The fixing can be realized by means of a normal clamp.

Download PDF

RTA

Resistance thermometer for immersion with AISI 316 sheath suitable for temperature measurement in chemical and/or food industry.

Download PDF

RTS

Resistance thermometer for immersion with connection head, suitable for generical measurements and regulations on plant with low pressure.

Download PDF

RTM

Resistance thermometer with mineral oxide insulation for immersion with connection head, suitable for generical measurements and regulations on plants with low pressure and with high vibrations.

Download PDF

RIS

Thermometric insert with standard insulation suitable for use into assembly type RTG etc.

Download PDF

RIM

Thermometric insert with MgO insulation suitable for use into assembly type RRG etc.

Download PDF

RTG

Resistance thermometer for immersion with exchangeble thermometric insert (type RIS) and orientable connection head suitable for measurements and regulations on plants with low pressure.

Download PDF

RRG

Immersion resistance thermometer with exchangeable MgO insulated thermometric insert (type RIM), orientable connection head and tapered protective sheath for fast response time, suitable for measurement and regulations on plants with low pressure.

Download PDF

RTF

Resistance thermometer for immersion with exchangeble thermometric insert (type RIS) and orientable connection head suitable for measurements and regulations on plant with low pressure.

Download PDF

RRF

Immersion resistance thermometer with MgO insulated exchangeable thermometric insert (type RIM), orientable connection head and tapered protective sheath for fast response time, suitable for measurements and regulations on plants with low pressure.

Download PDF

RTI

Resistance thermometer suitable for mounting together with thermowells (type PT or PB), for the temperature measurement on big plants and with high pressure.

Download PDF

RTP

Resistance thermometer suitable for mounting together with thermowells for the temperature measurements on big plants and with high pressure.

Download PDF

RAL

Probe for the measurement of internal and external hambient temperatures realized in aluminium.

Download PDF

RCT

Reistance thermometer for immersion suitable for measurement in narrow space on plant with low pressures.

Download PDF

RAB

Probe for the measurement of internal room temperatures realized in plastic material.

Download PDF

MRC

RTD with MgO insulation for the exhaust gas temperature measurements of engines with 316SS sheath. The electrical connection is realized by means of a Teflon insulated cable covered with a stainless steel flexible housing

Download PDF

MRG

RTD suitable for the measure of the engine exhaust gas temperature. Realized with a 316SS sheath, a free rotating connection head and with an spring-loaded insert. The process connection is realized by means of a threaded fitting.

Download PDF

MRV

RTD suitable for the temperature measurements of liquid to be use together with a thermowell. The probe is made with an interchangeable spring-loaded insert mounted into a connection head with adjustable cable entry.

Download PDF

MRS

RTD suitable for the liquid temperature measures. Realized with an aluminium or plastic watertight connection head and with a 316SS sheath.

Download PDF

MRF

RTD suitable for the liquid temperature measurements to be use together with a thermowell. The spring-loaded thermometric sheath assures the contact with the bottom of the thermowell. The well connection is type "fast" and the electrical connection is realized by means of a angled connector acc. to EN 175301 standard.

Download PDF

MRA

RTD suitable for the temperature measurement of the engine room, of the freezing cells or of the external ambient temperature. Realized with an aluminium case and with a 316SS sensing part.

Download PDF

Back to Search